80 PLUS® GOLD 87 to 93 percent efficiency @ 230V and 20 to 100 per cent load. 80 PLUS® Gold certified.
Dynamic Hybrid Transformer Topology Technological breakthrough topology using a staged dynamic transformer array for extremely high efficiency with the most durable and stable output at any load.
ErP Lot 6 ready! Help systems to meet EU eco-design directive ErP/EuP Lot 6 (<1W in standby mode) due to improved, high-efficient 5V standby (+5Vsb) circuitry.
C6 & Hybrid Support Supports energy saving modes of current and future CPU & GPU generations (C6 & Hybrid Mode) due to ZERO LOAD Design (no minimum load).
Multi Rail Design Stable and safe power supply thanks to up to four high-performance and massive 12V rails each with separated over current protection (OCP). Extremely low ripple noise.
Rock Stable DC-to-DC converter for minimum energy losses and maximum efficiency as well as best possible and most stable voltage regulation at dynamic and cross loading.
Intel ATX12V v2.3 Compliant with latest desktop power supply design guide. Full support of most current CPU: Intel® Core 2 Duo™ / Quad™ / Extreme™ / Core i7™ / i5™ / i3™, “Sandy Bridge“ and AMD® Athlon™ II X2 / X3 / X4 Phenom™ II X2 / X3 / X4 / X6, „Bulldozer™“ or “Llano™“.
Fit4Server* Compliant with latest server power supply standard SSI PSDG and downward compatible with EPS12V v2.92, v2.8. Full support of most current CPU Intel® Core™ Extreme™ / i7™ / i5™ / i3™, Xeon™ and AMD® Opteron™. * only ERV850EWT-G and ERV1000EWT-G
DXXI ready! Full support of most current DX11 graphics cards due to minimum two 6+2P (8P) PCI-E connectors.
Full Graphics Power Supports SLI™ and CrossFireX™ systems.
Future ready and flexible All-round modular cable management. 10/12P sockets for possible connector changes of upcoming high-performance CPU and graphics card generations.
Air Cooling by Enermax Integrated 13.9cm fan with patented Twister Bearing Technology ensures efficient and ultra silent cooling and long lifetime (100,000 hours MTBF).
SpeedGuard Ultra silent and powerful cooling performance thanks to the advanced and intelligent fuzzy logic fan speed control with min. 300 or 500 RPM up to max. 1,000 or 1,200 RPM (depending on the model).
HeatGuard Keeping PSU fan running for 30-60 seconds after shut down to dissipate the remaining system heat and prolonging system lifetime.
High-quality Japanese Capacitors Highest Enermax quality standards for leading stability and maximum durability. 105°C Japanese electrolytic capacitors without exception.
CordGuard Fixing the AC cord tightly to avoid accidental shutdowns of your PC.
Non-stop @ 50°C Non-Stop industrial class performance at 50°C ambient.
Worldwide Compatibility 100-240V AC* input with automatic adjustment and up to 99% active Power Factor Correction (PFC) for global usage. * ERV1000EWT-G: 115-240V AC
ENERGY STAR 5.0 ready! Support computer system to meet ENERGY STAR 5.0 standard.
Dimensions (W x H x D) 550/650W: 150mm x 86mm x 160mm / 750/850/1000W: 150mm x 86mm x 175mm.
Minimal contact area For an effective noise reduction
Rotor with integrated magnet For a frictionless and smooth motion
Self-lubricating bearing sleeve Abrasion protection for a longer lifetime
Twister Bearing Technology (patented)
Persistent low noise level
Longer life: up to 100.000 hours MTBF
Magnetized steel ball
Self-lubricating nano bearing
Coils
Flexible magnets inside the rotor
Proved Quality
Dynamic Hybrid Transformer Topology
All current options for further improvement of the PSU DC stage have been exhausted. For this reason, PSU manufacturers focus on the development of more efficient AC technologies. With the so-called “Dynamic Hybrid Transformer Topology” Enermax made the breakthrough: It is based on three pathbreaking innovations:
Dynamic Resonant Transformer Array Enermax implemented a so-called Dynamic Resonant Transformer Array. It is based on the high-efficient resonant topology which is used for example in LCD monitors. The most noticeable modification on PCB is an additional resonant choke.
Dynamic Voltage Boosting Transforming Initially, the capacitors are charged with alternating current (AC) from the wall socket. They ensure the continuous AC supply of the transformers according to the DC consumption of the PC system. Up to now, capacitors have been charged statically, so that too much power got lost at low loads. The capacitors of Revolution87+ series are charged with dynamic voltages – according to the required system power. That way, Enermax is able to increase the efficiency significantly.
Dynamic Frequencies Transforming Transformers step the alternating current up or down. During this operation a part of the input power gets lost. Enermax managed to optimize this process by the use of dynamic frequencies. The transformers work with a wider frequency range according to the variable power consumption of system components. That way, Enermax is able to reduce energy loses radically.
Magnetized steel ball
Self-lubricating nano bearing
Coils
Flexible magnets inside the rotor
